So the end of the year is coming and I'm desperately trying to finish all those nearly-there figures. Last night I was putting the finishing touches to a bunch of Perry's Desert Rats that I started just befor summer but have been virtually untouched for six months.
As the previous Desert Rats had been painted using Army Painter Dip I decided to try dipping the Stranglers from Shadows of Brimstone too. When I opened the can I noticed that a thick crust had formed on the dip, apparently I had not closed the lid properly. Getting rid of the hardened layer I stirred the dip, noticing it had thickened quite a lot. Using an old wash brush I dabbed it onto the first Perry figure. It went on ok but a bit thick, and as it wasn't as runny as normal it didn't really flow into all the crevices. Using the brush I managed to smear it around so it looked ok.
I decided to try and dilute what was left of the dip and tried first Thinner, but it didn't mix properly. I then figured I could try Future Floor polish (that I have been using when making my own dip) and first it looked like it would work. I didn't dare try it on one of the beautiful Perry figures, instead I gunked it onto a Strangler.
|
The ugly, the ugly and the ugly. |
As you can see from the pictures it didn't work as well. While the dip was a bit less thick, the paint itself glooped together inside the varnish/dip mixture and didn't flow at all. The middle figure in the picture above was the first try. Not perturbed by the horrific result I tried again, this time wiping most of the gunk away with a cloth moistened with thinner. Slightly better result on (on the right) except that the thinner took off the base coat as well in some places. I gave up and binned the can of Army Painter and mixed my own wash, which I used on the left strangler.
So what happened to the Perry figures?